Call us today at 1.800.708.9053!


The Commercial Asbestos Removal Process

Asbestos Removal in Buildings

The main steps involved in a typical Bluestone asbestos removal project are:

  1. Prior to performing any asbestos removal work, Bluestone workers establish a regulated work area and isolate that area from the rest of the building. 
  2. High Efficiency Particulate Air (H.E.P.A.)-filtered negative air machines are utilized to establish a negative air environment to prevent migration of asbestos fibers from the work area.
  3. Workers put on protective suits and respirators and then enter the work area.
  4. Workers carefully remove the asbestos materials while using amended water.
  5. All surfaces are H.E.P.A. vacuumed and wet wiped as a final clean.
  6. An encapsulant is applied that locks down possible asbestos fibers that may remain after final cleaning activities. 
  7. All waste in the work area is double-bagged, properly labeled and transported from the building in accordance state and federal regulations.
  8. An independent testing company conducts a final visual inspection.  If the work area passes the visual inspection, the testing company conducts clearance air testing to verify that the work area is safe for re-occupancy.
Bluestone Environmental, Inc., Mold Remediation, Bridgeview, IL

Home | Residential Asbestos Removal | Commercial Asbestos Removal | Residential Mold Removal | Commercial Mold Removal | Asbestos Testing Services
Before and After | About Us | Contact Us | Testimonials | Frequently Asked Questions | Sitemap | Privacy Policy

Asbestos Removal Chicago | Mold Removal Chicago | Asbestos Testing Chicago